The lightest Ultrasonic Wireless Cutter Ever Made
The first cordless ultrasonic cutter neoblade with an integrated active cooling system. Stay cool, sharp, and effortlessly precise.
NeoBlade
The Most Compact Wireless Ultrasonic Cutter for the Evolved Maker
£114.00 GBP
Add Accessories, Save 15% Off!
Description
Basic Specs
What's includes
Shipping
NeoBlade
£114.00 GBP
Powerful & Smooth Cuts on Any Material
The heart of NeoBlade is a 40,000 Hz transducer. What used to take pressure now takes a gesture.
Up to 40W of Adaptive Cutting Power
NeoBlade reads the density of your medium and delivers just the right energy—only when needed.
Built-in Cooling System
Compact yet powerful, this ultra-efficient 13,000 RPM fan minimizes noise while actively cooling the system from within.
Precision Airflow
Cool air enters from the front (LED vent with dust filter), flows over the transducer and PCB, and exits from rear side vents — keeping heat away from the battery.
Aluminum Alloy Chassis
Dissipating heat evenly across the frame.
Up to 40% cooler than similar tools. No hot spots, no forced cooldowns.
Precision Mode
Press and hold for short, precise cuts on intricate or delicate parts.
Continuous Mode
Toggle down for nonstop, long cuts on your big projects.
Fast-Charge: Project Never Pauses
NeoBlade runs on a high-performance, replaceable dual-cell battery system. Each pack delivers 30 minutes of cutting performance—precise and consistent.
Hot-swap Mechanism
Twist. Replace. Keep creating.
Swap batteries in seconds with our intuitive twist-lock design—no tools, no downtime, just uninterrupted workflow.
Free from Tangled Wires
No more constraints or interruptions—just pure creative flow. NeoBlade charges conveniently via a rear USB-C port and comes with a charging cable included, so you're always ready to cut without limits.
Six Precision Blade Designs
Created from SK5 high-carbon steel, lasting 2–3× longer than standard blades.
Standard Blade
Long Blade
Chisel Blade
Mini Chisel Blade
Curved Blade
Double Edge Blade
Versatile 30° blade for general-purpose cutting.Ideal for straight cuts and suitable for 80% of daily use.
Extended blade for cutting thicker materials.Perfect for splitting and heavy-duty slicing.
Inspired by woodworking chisels.Great for carving, grooving, and controlled material removal.
Half-width chisel blade, only 2mm wide.Designed for fine grooves and detail carving in tight areas.
Curved profile for smooth, flowing cuts.Ideal for arcs, curves, and organic shapes.
Dual-beveled tip for sharp-angle carving and V-shaped grooves.Perfect for precision detailing.
A Complete System, Not Just a Tool
Turbo Dock
Charge with ease and stay ready to go with the Turbo Dock.
NeoBlade ToGo Case
Protect your tool and craft wherever it travels.
NanoTech Cutting Mat
Provides a durable, self-healing surface engineered for ultrasonic precision.
Replaceable Battery Pack
Hot-swap batteries you're never waiting to recharge.
Ultimate Professional Kit
Ideal for professional studios and precision enthusiasts. Get 10% off on the kit
£257.00 GBP
£73.00 GBP
See How Others are Using NeoBlade
Technical Specifications
Basic
Product Diameter: 224x33x26mm(8.8x1.3x1.0 inch)
Body Material: Aluminium Alloy,NyLon+Fiber Glass,ABS
Operating Temp: 0-60°
Core parameters
Frequency: 40,000Hz
Power Rate: 9W-40W (Adaptive)
Cooling: Vortex Fan
Fan Speed: 13,000RPM
Charging
Voltage: 7.4V
Battery Capacity: 2*1300mAh
Charging Method: TurboDock/PD USB-C 12V 2.5A
Charging Time: Fast Charging-30min/Wired Charging-60min
What You Get
NeoBlade (Cutter)
✓
✓
✓
6-in-1 Blade Trial Kit (6 Types, 6 Blades Total)
✓
✓
✓
Turbo Dock With Battery Pack
—
✓
✓
Blade Collection (6 Types, 70 Blades Total)
—
—
✓
Customer Reviews
Based on 25 reviews
92%
(23)
8%
(2)
0%
(0)
0%
(0)
0%
(0)
L
I had a use for this tool but found it to be even more useful than anticipated.
P
I print and paint sla models and I install things like LEDs, smoke machines and audio PCBs so there can be lots of wiring and cutting..
Normally I'd use a dremel but it creates lot's of ultra fine dust that's EXTREMELY toxic, the NeoBlade cuts clean only leaving small gritty fragments that are to heavy to breathe it! (Similar to sand or salt)
Anyway I was given the chance to try out the ultrasonic cutter and WOW it's fantastic,, it cuts through just about everything with little to no effort and if one blade struggle simply change the blade for something more suitable as they all cut slightly differently..
I've tried a few ultrasonic cutters from no name manufacturers from AliExpress to the one made by Phrozen (horrible cutter) and the NeoBlade is far superior in both build quality and performance..
Also Hozo customer service is genuinely some of the best I have ever experienced and I would DEFINITELY recommend it anyone thinking about getting a NeoBlade or any of there products!!
The battery life doesn't seem very long at around 20 to 30 minutes but that's the beauty of there hot swap system, as soon as it runs low simply swap the battery over and you are good to go. It takes my unit about 4 minutes to fully recharge a battery so you can literally work for HOURS at a time..
I also had the pleasure of test the NeoBlock and NeoRuler (with calipers) and again fantastic design and build quality.
I have always purchased my own products so that when it comes to the review I'm free to say whatever I want but I reached out to HOZO Design because I was so impressed by the the advising..
I'm so glad that I did because I'll be using these products EVERYDAY, so thank you to everyone at Hozo design I really appreciate the opportunity to try out your products and I look forward to seeing what they come up with next!!!
Ps
I would DEFINITELY check out the NeoRuler especially with the caliper attachment and I'll have a YouTube review coming soon!🥰
B
Was skeptical as ultrasonic knives are usually quite pricey but bought anyways as I previously bought their ruler and was satisfied with it.
Just tested with some ABS parts that needed some trimming and yeah, it works great. Cuts right through with very little pressure and very controllable. If this was done with a regular knife I'm pretty sure I would have stabbed myself at some point as I was trimming small parts so my fingers were super close to the blade.
J
It is an awesome tool to clean up prints and cutting many things
G
This is a fantastic tool!