NeoSander-Detail Sander
Product Details
Compatible Materials
Designed for precision finishing across multiple surfaces:
Key Specs
- Tool Weight
- 89 g (without sanding head)
- Runtime
- 45–240 min
- Charging
- USB-C Charging
- Protection
- Main unit IP54-rated (front section splash-proof)
What's Included
NeoSander 8-Head Starter Kit Includes:
- NeoSander ×1
- Basic Sanding Head Collection ×1
- Basic Sanding Paper Kit ×1
- USB-C Charging Cable ×1
- User Manual ×1
* Saw blades and charging dock are sold separately.
Sandpaper Grits Included
NeoSander-Detail Sander
Built to Take on Every Task
8 Head Types for Every Tight Spot
Tight corners, delicate curves, or hard-to-reach spots—swap heads quickly and sand with precision, right in your hand.
01
Pointed Tip
The sharp tip is extremely versatile, perfect for reaching tight spots, intricate grooves, and fine details others can’t access.
02
Flat (Slim)
Ideal for narrow flat surfaces, delicate edges, and precise finishing in small or confined spaces.
03
Flat (Medium)
Suited for medium-sized flat areas, smoothing surfaces efficiently while maintaining full control and precision.
04
Flat (Large)
Best for quickly smoothing large flat surfaces; works perfectly with foam sandpaper for finer, even results.
05
Half-Cylinder
Excellent for shaping and smoothing curved surfaces, semi-circular grooves, and edges with consistent control.
06
Arc
Slightly more curved than the Half-Cylinder; perfect for arcs, rounded corners, and gently curved surfaces.
07
Acute Angle (45°)
Allows sanding two angled surfaces at once, fitting narrower spots than Flat (Slim).
08
Right Angle(90°)
Ideal for sanding two perpendicular faces simultaneously, creating precise 90° edges and clean corners.
Precision in Every Pass
Controlled, precise sanding in tight spots—no over-sanding like rotary tools.
Smooth in Every Detail
From rough shaping to polished, mirror-smooth finishes with ease.
Adhesive Sandpaper
Tight corners, delicate curves, or hard-to-reach spots—swap heads quickly and sand with precision, right in your hand.
Color-Coded System
With this setup, your grits always stay sorted and ready to swap. From coarse to fine, just grab the head you need, snap it on, and keep sanding.
Accessories That Boost Performance
Expand what your NeoSander can do—tackle tricky details, double as a cutting tool, and make 3D printing more fun than ever.
Two Types Saw Blade
With the optional Saw Collection (sold separately), NeoSander transforms into the world's smallest electric mini reciprocating saw.
One motion system, two disciplines.The same 13,000 SPM reciprocating motor powers 0.2mm saw blades with patent dual-sided etched teeth. Anti-jam technology prevents binding, while the compact design reaches tight spots that full-size saws can't access.
Two blade types for different cutting needs:
Curved Blades (4 pcs)：For straight cuts and material removal.
Jigsaw Blades (4 pcs)：For intricate curves and through-cuts.
and precision curve work.
Perfect for cutting resin prints, plastic parts, and wood details.
Add this accessories below ↓
Foam Sandpaper
Foam Sandpaper maintains consistent contact across uneven surfaces, absorbs excess pressure, and delivers controlled material removal—avoiding over-sanding on high spots while evenly sanding the entire surface.
Foam sandpaper uses electrostatic sand planting technology—abrasive particles are bonded directly to the foam surface, creating a single integrated layer that flexes and conforms like the foam itself.
Every Master Sanding Paper Kit includes 3 standard sanding sheets and 1 foam sheet.
Add this accessories below ↓
Pro Case
Take your NeoSander setup anywhere.Craftedfrom premium water-resistant vegan leather—protects against splashes,dust, and impacts.Organized compartments keep NeoSander, heads, blades, and sandpaper secure.Compact design maintains a professional lookwherever you work.For makers who work everywhere.
Add this accessories below ↓
Charging Dock
The NeoSander Charging Dock delivers Type-C fast charging with integrated storage compartments that keep your sandpaper organized, flat and protected.A built-in work tray holds parts and components during sanding—keeping your workpieces secure and your workspace organized.
See What Creators Says About NeoSander
Technical Specifications
Basic
Core parameters
Motor Type: Reciprocating Linear Motor
Power: 0.8-5W (Adjustable)
Rated Speed: 13,000 strokes per minute (SPM)
Stroke Length: 0.6-1.8mm (Infinitely Adjustable)
Concentricity: <0.05mm (6× more precise than competitors)
Vibration Reduction: 85% motor vibration reduction
Charging
Battery:3.7V-1100mAh
Runtime:45 min (full load) / 240 min (typical use)
Charging Port: Type-C 5V-1A (PD Compatible)
Charging Options: Direct USB-C or Charging Dock
Use While Charging: Yes
Included in the Box
NeoSander
Basic Sanding Head Collection
Basic Sanding Paper Kit
USB-C Charging Cable
User Manual
NeoSander FAQ
Isn't this basically an "electric toothbrush" with sandpaper?
That's probably the most common comparison—and it's understandable. But not everything that moves with sandpaper is suited for precision sanding. What really matters is how it moves, and how controllable that motion is.NeoSander uses a true linear back-and-forth motion—not spinning, not wobbling. Combined with a short, adjustable stroke (0.6–1.8mm) and very low runout (<0.05mm concentricity), each contact stays stable and predictable instead of bouncing around.Sure, an electric toothbrush or a DIY setup can technically sand—just like hand sanding can get results. But NeoSander isn't about whether sanding is possible. It's about making fine detail sanding easier to control, more consistent, and far less tiring.
At 13,000 SPM, won't it melt plastic?
In fine detail sanding, the sanding head only contacts the surface for very brief moments, giving heat very little time to build up. The reciprocating motion is less aggressive than rotary tools, and plastic melting is rare in our testing.
NeoSander also supports wet sanding with waterproof sandpaper, making it easy to further reduce heat when working on sensitive materials like resin prints.
In normal use, NeoSander actually poses less heat risk on plastics than high-speed rotary tools, which maintain constant contact and generate heat far more aggressively.
If I slow it down (reduce stroke length), will it stall or lose power?
That's a common issue with many sanding tools—and it comes down to how they're built.
Traditional tools use rotary motors, then rely on gears or eccentric mechanisms to turn rotation into sanding motion. At low speeds, especially when you apply side pressure, that system struggles. RPM fluctuates, tools vibrate, and stalling becomes more likely.
NeoSander works differently. It uses a reciprocating linear motor, driving the sanding motion directly:
- No gears
- No eccentric conversion
- No power being "translated" through extra mechanisms
Because of this, the output stays smooth, stable, and predictable. It doesn't depend on sudden bursts of torque, and it's much less sensitive to load changes.
Can it be used on metal, car paint, or powder coating?
Yes. With appropriate sandpaper, NeoSander can be used on metal, automotive paint, and powder coating.
Its linear reciprocating motion is especially effective for controlled, precision sanding—helping you refine edges, blend surfaces, and make small corrections without digging in or overshooting.
When accuracy matters, NeoSander gives you a level of control that's hard to achieve with conventional rotary tools.
Will sanding hard materials cause the sanding head to move more slowly?
When sanding harder materials, the reciprocating speed—or more precisely, the reciprocating frequency—does not actually change. The motor continues to drive the sanding head back and forth at the same rate.
However, when greater force is applied and friction increases, the system has to work harder to overcome that resistance. As a result, the stroke length of the sanding head is shortened. In other words, the number of strokes per minute remains the same, but the distance traveled in each stroke becomes shorter.
This reduction in stroke length can easily create the visual impression that the tool is slowing down, when in reality it’s the amplitude that changes—not the speed or frequency of the motion.
What Customers Say About NeoSander
I’m using the HOZO NeoSander on wood carvings and so far have had some reasonable success. I have noticed it does a great job on flat surfaces however when using some of the heads on details the sanding paper does not last long and wears away from the head quickly. When using the larger heads or applying even a very light pressure causes the length of the stroke to be degraded. Noise is fine, length of battery life is fine, vibration in hand is fine, and the fit and finish of the product is good.
Overall a positive experience and I look forward to gaining more experience with it
기존의 찌질한 무선제품은 잊어버려도 될만큼 출력저하도 안일어나고 원하는정도의 힘으로 치댈수있어서 좋네유
I'm very impressed! I carve miniature wood sculpture. The first day I used it, the battery lasted a long time. I like the precut sanding pads. So far, I would recommend the NeoSander.
I really do like the sander, its small and can get to spots that I always struggled with. The one thing that I didn't like was the if it's a long flat object with details I needed to get into it couldbt lay flat. I should have a tip the extends more downward so I can actually sand a flat surface. Maybe one of the sanding pieces could be at a right angle to all the others so you could hold the sander straight up and down and still sand those hard to reach places.
Otherwise I don't regret getting the sander. I have the ultrasonuc knife as well that works great. So far both are working as intended and still going. I will update after even more use.
he tenido otra lijadoras pero esta es genial para para llegar a lugares de la pieza que antes eran imposible. realmente una compra necesaria, muy contenta
Pas mal. Par contre les accessoires vraiment cher par rapport à la qualité.
ILOVEit but This sander vibrates quite a bit
Really very practical. At first, it might seem a little noisy, but you don't need to push the speed too high. It really allows for clean and precise work. On Makerworld, I found a 3D-printable storage box made specifically for this tool. So it's well protected and I have everything within easy reach...
This is my soul mate. I am 3D Printing editing. I selling art toys. I used to use a lot of my hands to sand figures with sandpaper until I have problems with tendons. This helps me a lot. So fast, so easy, so helpful.
I do 3d carving in wood, and I'm happy with sander. It helps me get into small tight places that would be difficult to achieve with out the aid of a sander like this. I think true it's potential is yet to be discovered. My only complaint is that it's hard to turn on and 📴
I love it, it's a purchase that I don't regret seeing over time, but it will greatly help me in the precise finishes of my projects.
Very unique handy tool light weight,handy for getting into tight places,time saving. Easy to use,Great value for the cost.
Absolutely love it. Perfect for small details. Very powerful
Just amazing, if you do modeling you need that tools
Excellent just what I need
Très satisfait
I bought a Nano-Sander for my partner to support her hobby. She's thrilled with the product, which has made many of her crafts much much easier.
am getting the feel of it working good on filament print will be doing some resin prints soon overall good product
Perfetto per la pulizia delle stampe sia in resina che in fdm si riesce a ragionare qualsiasi zona della stampa dove bisogna agire grazie al vasto assortimento degli utensili in dotazione e si può ottenere la finitura desiderata a seconda della tipologia di tela abrasiva utilizzata
It's a great little sander, actually way smaller than I thought it was going to be. Battery length is great. My only gripe is that the sandpaper patches don't last very long
Super
Nice gadget for3d printingand lasercutting.
10/10
I got that new Hozo NeoSander, and it is nice! I tried this out on a delicate resin 3D print. It did a good job. It is a great tool for the 3D printing hobby.
It's too soon to tell how it will hold up but I bought this as a gift and the recipient was very excited about it.
It's small form factor allows it to easily fit in the palm of the hand and to be held for a long period of time. The different shaped heads allows for ease of sanding on different type of surfaces and the sanding paper is easy to swape.
I bought the standard set for myself on Amazon and absolutely loved it, so I decided to get the premium set for my wife. It went off sale, and I waited for a few weeks but it never went back on sale. Her birthday was this past weekend, so I bought it direct for a few bucks less than Amazon, and of course today it's like $30 less because of prime day sales.
Regardless, the machine is awesome and I highly recommend it.
Haven't had chance to use it yet but looks good.