Buying a tool for someone else's hobby is easier when you know the job it will do. For a model maker, that could be sanding a curve that is awkward to reach. For someone who 3D prints their own parts, it might be trimming away supports after a print. And a DIY project can involve plenty of measuring before anything gets cut.

These four HOZO gifts for makers and DIY enthusiasts cover those jobs, with tools for shaping and detail sanding, an ultrasonic cutter for printed parts and craft materials, and a ruler for planning small builds.

Four HOZO maker tools in action: NeoBlock sanding, NeoBlade cutting supports, and NeoRuler with NeoCaliper measuring a printed part

NeoBlock Combo for Sanding Curves and Corners by Hand

A piece of sandpaper is easy to hold against a flat surface. Keeping it in contact with a rounded model part or the inside of a groove is more awkward. NeoBlock Combo gives the sandpaper a shaped support and a handle, so the person using it can work along those surfaces without trying to hold a loose strip in place.

It is a useful gift for someone who builds models or makes small wooden objects. Think of smoothing the edge of a handmade box, refining a rounded component, or working into a recessed section before painting. Because sanding is manual, they decide how much pressure to apply and can stop checking the surface as often as they like.

Hand holding the NeoBlock sanding belt tool against a hexagonal wooden block on a workbench

The Combo includes three interchangeable heads. One handles flat surfaces and narrow edges; the Others suit inward and outward curves. Switching the head changes how the abrasive meets the work, which is the main reason to choose this set over a single sanding block.

It also comes with six sanding belts, ranging from 120 to 800 grit. The lower numbers are coarser for initial shaping, while the higher numbers suit finer finishing. Both heads and belts change without tools, and replacement belts are available when the originals wear out.

For someone new to model making, the Combo provides several head shapes and grits to try without choosing each separately. It also makes sense for an experienced maker who likes finishing small pieces by hand.

NeoSander for Model Makers Who Spend Time on Small Details

Sanding several small components can mean repeating the same motion for a long time, especially along narrow edges and inside corners. NeoSander takes over that back-and-forth movement. The maker still guides the head and checks the finish, but the motor does the repetitive part of the work.

This is the option we'd pick for someone who builds models regularly and spends a lot of that time on finishing. A small head can work along a model panel's edge or into a recess where a larger sanding surface would be awkward. The cordless body also leaves them free to turn the piece and approach it from another angle.

NeoSander received a 2026 IDEA Bronze Award.

NeoSander reciprocating detail sander smoothing the finger details on a 3D printed figure

The stroke length is adjustable from 0.6 to 1.8 mm, changing how far the head travels along the workpiece. A short travel distance helps keep motion within a small working area; The interchangeable head shapes provide different contact surfaces for curves, grooves, and corners.

The standard kit includes eight sanding heads, starter sandpaper, and a USB-C charging cable. It can charge directly via USB-C, so a separate charging dock is optional.

Both tools can be useful for the same project. NeoBlock helps with shaping and smoothing flat or curved surfaces by hand, while NeoSander brings powered sanding to small edges, grooves, and recessed details.

NeoBlade Premium Combo for Trimming and Refining 3D Prints

A 3D print may still have supports attached and excess material to trim before it is ready to assemble or paint. NeoBlade Premium Combo helps with that cleanup, from cutting away supports to trimming small areas around a model's details. Ultrasonic vibration helps reduce the pressure needed for cutting, while the maker guides the blade through the material.

We'd choose it for someone who regularly prints miniatures, display models, or parts that need work after printing. It gives them a way to cut and shape those pieces before moving on to sanding and finishing. The cordless body also makes it easier to change position around a model without moving a cable out of the way.

NeoBlade won the 2026 iF DESIGN AWARD and the 2025 GOOD DESIGN AWARD.

NeoBlade ultrasonic cutting knife trimming supports from a detailed 3D printed model

The Premium Combo is our pick for gifting because it includes a larger supply of replacement blades. Alongside the six-blade sampler, it adds a 70-blade collection covering six blade types, with six safety dispensers. That gives the recipient spare blades as they wear out, plus different shapes for straight cuts, curves, grooves, and fine carving. The package also includes a battery pack, TurboDock charging station, and PD USB-C charging cable.

It can also cut paper, cardboard, and leather for craft projects, so its uses extend beyond the printer. Match the blade to the material and thickness using the NeoBlade cutting guide and current product specifications.

NeoRuler for Reading Plans and Measuring Models

If you're shopping for someone who enjoys building models from plans, NeoRuler lets them read scaled measurements on screen and swap attachments for drawing and measuring model parts. They can use it to prepare a side panel for cutting or check the dimensions of a finished part.

Printing a drawing can change its scale if the page is resized. To set a custom scale, measure a reference line with NeoRuler and enter the known length it represents. Then move the slider to read measurements on that scale. The LED markings along the edge adjust their spacing to match, giving you a visual guide as you work across the drawing.

You can set any position as your starting point, then move the slider to measure the distance to another point. When it's time to make a mark, attach the NeoDrafting kit, place the tip of your pen in the guide hole, and use the readout to mark the position before drawing the part's outline or making a cut.

Add the NeoCaliper attachment, and the same NeoRuler becomes a scale caliper for measuring physical models. Use a 1:1 setting to measure the model's actual dimensions. To compare a part with its drawing, use the appropriate scale for each so both readings refer to the same full-size dimension.

For someone who regularly draws, cuts, and assembles their own models, we recommend the NeoRuler Premium Combo. It includes NeoCaliper and the drafting accessories, so they can switch attachments as they move from one step to the next.

It received the iF DESIGN AWARD 2024.

NeoRuler with the NeoCaliper attachment reading 11.4 mm on a 3D printed part at 1:1 scale

Latest Stories

This section doesn’t currently include any content. Add content to this section using the sidebar.