The lightest Ultrasonic Wireless Cutter Ever Made

The first cordless ultrasonic cutter neoblade with an integrated active cooling system. Stay cool, sharp, and effortlessly precise.

Load video:

Powerful & Smooth Cuts on Any Material

The heart of NeoBlade is a 40,000 Hz transducer.  What used to take pressure now takes a gesture.

Load video:

Up to 40W of Adaptive Cutting Power

NeoBlade reads the density of your medium and delivers just the right energy—only when needed.

Built-in Cooling System

Compact yet powerful, this ultra-efficient 13,000 RPM fan minimizes noise while actively cooling the system from within.

Precision Airflow

Cool air enters from the front (LED vent with dust filter), flows over the transducer and PCB, and exits from rear side vents — keeping heat away from the battery.

Aluminum Alloy Chassis

Dissipating heat evenly across the frame.
Up to 40% cooler than similar tools. No hot spots, no forced cooldowns.

Precision Mode

Press and hold for short, precise cuts on intricate or delicate parts.

Continuous Mode

Toggle down for nonstop, long cuts on your big projects.

Fast-Charge: Project Never Pauses

NeoBlade runs on a high-performance, replaceable dual-cell battery system. Each pack delivers 30 minutes of cutting performance—precise and consistent.

Load video:

Hot-swap Mechanism

Twist. Replace. Keep creating.
Swap batteries in seconds with our intuitive twist-lock design—no tools, no downtime, just uninterrupted workflow.

Free from Tangled Wires

No more constraints or interruptions—just pure creative flow. NeoBlade charges conveniently via a rear USB-C port and comes with a charging cable included, so you're always ready to cut without limits.

Six Precision Blade Designs

Created from SK5 high-carbon steel, lasting 2–3× longer than standard blades.


Standard Blade

Long Blade

Chisel Blade

Mini Chisel Blade

Curved Blade

Double Edge Blade

Versatile 30° blade for general-purpose cutting.Ideal for straight cuts and suitable for 80% of daily use.

Extended blade for cutting thicker materials.Perfect for splitting and heavy-duty slicing.

Inspired by woodworking chisels.Great for carving, grooving, and controlled material removal.

Half-width chisel blade, only 2mm wide.Designed for fine grooves and detail carving in tight areas.

Curved profile for smooth, flowing cuts.Ideal for arcs, curves, and organic shapes.

Dual-beveled tip for sharp-angle carving and V-shaped grooves.Perfect for precision detailing.

A Complete System, Not Just a Tool

Turbo Dock

Charge with ease and stay ready to go with the Turbo Dock.

NeoBlade ToGo Case

Protect your tool and craft wherever it travels.

NanoTech Cutting Mat

Provides a durable, self-healing surface engineered for ultrasonic precision.

Replaceable Battery Pack

Hot-swap batteries you're never waiting to recharge.

Ideal for professional studios and precision enthusiasts. Get 10% off on the kit
NeoBlade Premium Combo, PremiumCombo
NanoTech Cutting Mat A3+ for Ultrasonic Cutter
NeoBlock Premium Combo with all sanding blocks and accessories

See How Others are Using NeoBlade

Technical Specifications

Basic

Product Diameter: 224x33x26mm(8.8x1.3x1.0 inch)

Body Material: Aluminium Alloy,NyLon+Fiber Glass,ABS

Operating Temp: 0-60°

Core parameters

Frequency: 40,000Hz
Power Rate: 9W-40W (Adaptive)
Cooling: Vortex Fan
Fan Speed: 13,000RPM

Charging

Voltage: 7.4V
Battery Capacity: 2*1300mAh
Charging Method: TurboDock/PD USB-C 12V 2.5A
Charging Time: Fast Charging-30min/Wired Charging-60min

What You Get

Viewing

NeoBlade
NeoBlade

$149.00

-

$149.00

Shop Now

NeoBlade (Cutter)

6-in-1 Blade Trial Kit (6 Types, 6 Blades Total)

Turbo Dock With Battery Pack

Blade Collection (6 Types, 70 Blades Total)

Customer Reviews

Based on 25 reviews
92%
(23)
8%
(2)
0%
(0)
0%
(0)
0%
(0)
L
LEO J.
Impressive Tool

I had a use for this tool but found it to be even more useful than anticipated.

P
Print i.P.i.
Absolutely amazing!

I print and paint sla models and I install things like LEDs, smoke machines and audio PCBs so there can be lots of wiring and cutting..
Normally I'd use a dremel but it creates lot's of ultra fine dust that's EXTREMELY toxic, the NeoBlade cuts clean only leaving small gritty fragments that are to heavy to breathe it! (Similar to sand or salt)

Anyway I was given the chance to try out the ultrasonic cutter and WOW it's fantastic,, it cuts through just about everything with little to no effort and if one blade struggle simply change the blade for something more suitable as they all cut slightly differently..

I've tried a few ultrasonic cutters from no name manufacturers from AliExpress to the one made by Phrozen (horrible cutter) and the NeoBlade is far superior in both build quality and performance..
Also Hozo customer service is genuinely some of the best I have ever experienced and I would DEFINITELY recommend it anyone thinking about getting a NeoBlade or any of there products!!

The battery life doesn't seem very long at around 20 to 30 minutes but that's the beauty of there hot swap system, as soon as it runs low simply swap the battery over and you are good to go. It takes my unit about 4 minutes to fully recharge a battery so you can literally work for HOURS at a time..

I also had the pleasure of test the NeoBlock and NeoRuler (with calipers) and again fantastic design and build quality.

I have always purchased my own products so that when it comes to the review I'm free to say whatever I want but I reached out to HOZO Design because I was so impressed by the the advising..
I'm so glad that I did because I'll be using these products EVERYDAY, so thank you to everyone at Hozo design I really appreciate the opportunity to try out your products and I look forward to seeing what they come up with next!!!

Ps
I would DEFINITELY check out the NeoRuler especially with the caliper attachment and I'll have a YouTube review coming soon!🥰

B
Ben B.
Was skeptical but in the end...good job! ദ്ദി ˉ꒳ˉ )✧

Was skeptical as ultrasonic knives are usually quite pricey but bought anyways as I previously bought their ruler and was satisfied with it.

Just tested with some ABS parts that needed some trimming and yeah, it works great. Cuts right through with very little pressure and very controllable. If this was done with a regular knife I'm pretty sure I would have stabbed myself at some point as I was trimming small parts so my fingers were super close to the blade.

J
John B.
It is an awesome tool to clean up prints and

It is an awesome tool to clean up prints and cutting many things

G
Gus R.
This is a fantastic

This is a fantastic tool!

Reviews in Other Languages